B&M FabricationSlash Front Bumper Polaris Matryx HD 155" Lime

The Polaris Matryx EXO front bumper comes loaded with unique features on the inside, while maintaining a clean, minimalist/thin profile on the outside. All of our bumpers have aluminum end caps tig welded to the main tube to eliminate the need for plastic end caps. This gives the bumper a clean look without the worry of losing end caps.

Inside we've added features that other companies often overlook.

-Our unique cross tube provides remarkable torsional rigidity.

-Stock belt mount bracket is designed with the same profile as the original bumper. This gives you a snug and pleasing fit, just as it was from the factory.

- Where the bumper comes out of plastic, we formed the tubing by pressing to allow the 1" tube to pass through without distorting the way the body panels fit. This is done by pressing each part of the tube separately to compensate for the press marks. Also, on the inner press mark we installed a rivet nut to accept the factory hardware that secures the belly part to the bumper.

Exterior features include the following,

-Minimum profile.

-Ample space to grab and lift. No flat plate or sharp edges.

-Welded and cut tube ends to eliminate cheap plastic caps.

-Bottom tubes are joined at the bottom to allow them to reach under the machine.

-We designed this to work with or without a skid plate.

 Fits all Matryx NA and Boost chassis.